HVAC final inspection services cover the last step of a permitted job: scheduling the jurisdiction's final inspection, keeping it on track, and closing out the permit once it passes. iPermit manages that closeout for HVAC and plumbing contractors across 40+ states, so a finished residential install doesn't sit behind an open permit.
HVAC final inspection services cover everything between a completed install and a closed permit: confirming the job is inspection-ready, scheduling the final with the local building department, tracking the result, and filing the paperwork that closes the permit. For plumbing contractors, the same process applies to water heater, repipe, and gas-line finals.
The inspection itself is performed by the authority having jurisdiction (AHJ) — the city or county inspector, not iPermit. What iPermit's final inspection management handles is the coordination around it: making sure nothing stalls, and that the permit is officially closed afterward rather than left half-finished. That distinction matters, because a passed inspection and a closed permit are not the same thing.
An open permit is a job the jurisdiction still considers unfinished. It can surface during a property sale, block future permits at the same address, and land back on the contractor who pulled it — sometimes years later. As iPermit puts it, permits left open can come back to haunt you, long after the crew has moved on.
For a residential HVAC or plumbing shop pulling dozens of permits a month, open permits accumulate quietly. Nobody notices until an escrow inspection flags one, or a homeowner calls asking why the county has no record of a completed job. Closing permits on time isn't paperwork hygiene — it's how a contractor keeps a clean record with each jurisdiction and avoids re-inspection scrambles down the road.
iPermit handles inspection scheduling directly with each authority having jurisdiction. Every city and county sets its own rules, windows, and portals, so we book the final, track its status in iPermit Pro, and update you when it passes or when a correction is needed — instead of your office sitting on hold with building departments.
That local knowledge is the point. iPermit has pulled more than 1,000,000 permits since 1976, which means the process rarely starts from scratch on a given jurisdiction. Your office submits the job once; the scheduling, follow-up, and status updates run through one portal, so the whole team can see where each residential inspection stands without chasing inspectors by phone.
In California, many HVAC finals require HERS field verification before the building department signs off. iPermit's own certified raters perform this testing on site — including duct-leakage testing measured with a calibrated manometer — then register the CF-3R certificate (officially the Certificate of Verification) through the CHEERS registry ahead of the final inspection.
This step is California-specific. California HERS field verification exists because the state's energy code requires third-party confirmation that qualifying HVAC work performs as designed. Manometer-based duct-leakage testing is one part of that verification; it measures how much conditioned air is escaping the duct system. Under California's 2025 Energy Code, effective January 1, 2026, this work sits within the Energy Code Compliance (ECC) Program and raters are ECC-Raters — HERS testing has been narrowed in scope, not retired. Outside California, HVAC finals follow local building-code requirements and do not involve HERS testing.
HVAC permit compliance depends on nothing sitting idle. iPermit submits 100% of permits within 24 hours of receiving a complete job package, which gets the permit open and the inspection on the calendar sooner. After a final passes, we file the closeout so the permit is officially finished rather than lingering in the jurisdiction's system.
Speed on the front end shortens the whole cycle. The faster a permit is submitted and approved, the sooner the final can be scheduled, and the sooner it closes. iPermit's permit pulling uses per-project pricing with no SaaS fee and no per-seat minimums, so a shop pays for the permits and inspections it actually runs — not a subscription that has to be justified against slow months.
If you run ServiceTitan, iPermit connects through a native ServiceTitan integration, so permit and inspection status shows up alongside the job. On Housecall Pro, Jobber, FieldEdge, or Service Fusion, your team manages the same work through the iPermit Pro web portal. Either way, final inspections don't live in a separate spreadsheet the office has to babysit.
No. The final inspection is performed by the local building department's inspector. iPermit schedules it, tracks it, and handles the permit closeout once it passes. In California, iPermit's certified raters do perform the separate HERS field verification that many jobs need before that final inspection can happen.
If an inspector flags a correction, iPermit relays the specifics to you. Once your crew resolves them, we reschedule the re-inspection. The permit stays open until it passes, so clearing correction items quickly is the fastest path to a clean, closed permit and a compliant residential HVAC or plumbing job.
No. Manometer-based duct-leakage testing is part of California's HERS field verification and applies to qualifying jobs under the state energy code. Outside California, HVAC finals follow local building-code requirements, which iPermit schedules and closes out but which do not involve HERS testing or a manometer.
Every permit and inspection lives in iPermit Pro, the client portal, with real-time status. Instead of calling building departments or digging through email, your office sees which finals are scheduled, which passed, and which need a correction — one place for the whole team, on any job in any state you work.